Purpose
To establish, on the part itself, that a machine with nothing recorded can keep its own history: the record is written while the part is doing the work, and the next boot reads it back by address with no host in the loop.
Procedure
- Link the C surface into the firmware and give it a flash partition of its own.
- Power on with the volume empty, fly, and let the part write the record as it goes.
- Cut the rail in the middle of a write, restore it, and have the firmware print the addresses it finds and the counts it holds.
- Dump the partition and compare it byte for byte with the same volume opened on a host.
Preconditions
- The LiteWing’s chip confirmed on the bench, since the firmware and the partition table target the ESP32-S3.
- A partition table that leaves room for the record on a 4 MB part.
- A flash medium the channel layer already models, wired to the part.
Deliverable
A recorded take of the two boots, with the counts the firmware prints and the addresses it names, and the dump opened beside it.
Verification
A device check on the part’s own flash.